Speed Sensor
Kit
|
This Speed Sensor was designed specifically for all motors with a tailshaft diameter of .875"or 1.125" and replaces the Zolox Speed Sensor. |
$95
|
|
Adapter Plate | |
||
|
We offer both a clutch-less and an adaptor plate that retains the clutch. Both are pre-cut and pre-drilled to match your transmission's bell housing for a clean, professional look. Just provide your vehicles make and model and we'll send you everything you need to couple your old transmission to your new motor. | ||
 |
1/4" powder-coated steel designed specifically for all 8" and 9" diameter motors. The steel cradle form fits around the motor with compression to prevent any twisting with torque. Easy to weld to. Easy to bolt to. Easy to mount. |
$130
|
|
Shunt 50mV
|
|
||
Magna Lugs
|
|
|
|
2/0 Battery |
Flexible rubber battery terminal covers protect your terminals from contact with unwanted surfaces preventing shorts and insuring safety. |
$1.75
|
|
A Potbox provides communication between the gas pedal and the controller, converting mechanical energy (your foot on the gas pedal) to electrical energy which the controller can then interpret and pass onto the motor. The Curtis PB-6 has been an industry favorite for years. |
$90
|
||
First Inertia Switch
|
In case of any impact the inertia switch will trip and disconnect power to the main contactor, adding another level of safety to your EV. This is essential when dealing with a high voltage electric vehicle. |
$58 |
|
Heat Shrink |
A high quality heat shrink made of polyolefin. It has a 3:1 shrink ratio and a build in adhesive that when heated, creates a waterproof connection and a perfectly sealed internal environment. It remains flame retardant, and is very flexible. |
|
|
