Warp Drive Controller
 
     

netgain controller
WarP Drive Controller

warp drive controller

Introducing The NEW HV Negain
WarP-Drive Industrial Controller

The WarP Drive controller comes to the market at the perfect time when high voltage motors and controllers are what EV enthusiasts are demanding.  Capable of 1000A of continuous output at 160V in it's base model, the Warp Drive can also be upgraded to 1400A at 360V!  The Warp Drive is the perfect high voltage controller to be coupled with Netgain's new WarP 11 HV motor.
72-200VDC
72-325VDC
72-450VDC
 

 

NetGain Controls WarP-Drive Liquid Cooling Kit


liquid cooling unit

This complete package is a collection of all the cooling components you'll need for your WarP-Drive motor controller:

  • 12V high-flow super-quiet pump
  • Waterproof electrical connectors
  • Radiator w/ integrated reservoir and (2 )mounted 12V fans
  • High-quality clamps for each connection
  • Quick-connect fittings on pump and radiators, and snap-clamps for reservoir
Cooling Kit Installation
$285
       
       
HEPA Throttle

netgain hepa throttle
Installation Guide

The WarP-Drive Hall-effect Pedal Assembly (HEPA) is an automotive accelerator pedal assembly with dual Hall-effect sensors. It includes dual return springs and has convenient mounting points. The Hall-effect unit eliminates the annoying wear out of regular pot boxes.

The pedal will require a custom bracket for mounting and may not fit all cars. For vehicles where mounting would not be possible, or if it is preferable to use the existing throttle pedal and cable, see the Hall-effect throttle (HETA) assembly on this page.


Price includes a 10' section of shielded cable which comes with waterproof connectors installed on both ends of the cable - one for the Hall-effect unit, and the other for the WarP-Drive Controller. This provides a factory installation appearance.
 
$140
       
       
       
Cable Pull Throttle
warp drive heta throttle
Installation Guide
The WarP-Drive Hall-effect cable-pull throttle assembly is an automotive-quality throttle input device with dual Hall-effect sensors and a variety of features to make it reliable and easy to install. It includes dual return springs. It also comes with an additional spring to allow for customization of the return tension by replacing the heavier spring with a lighter one.

The Hall-effect unit eliminates the annoying wear out of regular pot boxes. The device easily accommodates various installations, where different throttle cable travel distances are required for each vehicle. This is accomplished with a set of 5 inner discs, giving the following travel options: 1.125", 1.25", 1.5", 1.75", and 2". The stock throttle cable is inserted between the top and bottom discs by removing the top disc, selecting the appropriate inner disc corresponding to the right travel distance, replacing the top disc and securing it, then reattaching the springs.

Price includes a 5' section of shielded cable which comes with waterproof connectors installed on both ends of the cable - one for the Hall-effect unit, and the other for the WarP-Drive controller. This provides a factory installation appearance.
 
$185
       
       
       

WarP-Drive Interface Module


netgain interface
WarP Drive Interface Manual

This device has been developed to interface directly to the WarP-Drive controller over the CAN bus communications line. It opens up an amazing array of capabilities. Some of its features include:

  • Data logging to a mini SD card from all internal sensors in the WarP-Drive, some of which are motor current and voltage and battery current and voltage, chill plate temperature, pulse width, throttle position, internal power supply voltages, external supply voltage, error and warning codes, and controller operating state.
  • Firmware upgrades to the WarP Drive
  • Real-time display of the above data parameters on a variety of screens.
  • Real time clock with super-cap battery backup. Set the time once, and even when unplugged, the time will be accurately kept.
  • Easy in-vehicle mounting using a windshield suction-cup mount (provided).
  • Powered over the connection to the WarP-Drive so only a single cable is required to operate.
  • Extremely sleek and compact design fits comfortably in your hands.
  • The interface module's firmware can easily be updated by simply obtaining the new firmware file by download, copying the upgrade files to the mini SD card, inserting the card into the Interface Module, and power cycling the unit. Seconds later, the unit is running with upgraded firmware.

Price includes Interface Module, mini SD card (1GB), and windshield mount.
 
$300
       
       
 
Copyright © 2010 www.evolveelectrics.com
EVolve Electrics™ All rights reserved.
Policies
credit card logos